To many people, static electricity is little more than the shock experienced when touching a metal doorknob after walking across a carpeted room or sliding across a car seat. However, static electricity has been a serious industrial problem for centuries. Today most companies recognize the value of a complete static control program. Implementing a static control program may cost a few dollars in the beginning but in the long term can save money, boost reliability of product, and enhance a companies reputation in the field.
Despite a great deal of effort during the past decade, ESD still affects production yields, manufacturing costs, product quality, product reliability, and profitability. The estimate actual cost of ESD damage to the electronics industry as running into the billions of dollars annually. The cost of damaged devices themselves ranges from only a few cents for a simple diode to several hundred dollars for complex hybrids. When associated costs of repair and rework, shipping, labor and overhead are included, clearly the opportunities exist for significant improvements.
But what means ESD? Static electricity is defined as an electrical charge caused by an imbalance of electrons on the surface of a material. This imbalance of electrons produces an electric field that can be measured and that can influence other objects at a distance. Electrostatic discharge is defined as the transfer of charge between bodies at different electrical potentials.
Electrostatic discharge can change the electrical characteristics of a semiconductor device, degrading or destroying it. Electrostatic discharge also may upset the normal operation of an electronic system, causing equipment malfunction or failure. Another problem caused by static electricity occurs in clean rooms. Charged surfaces can attract and hold contaminants, making removal from the environment difficult.
Because of the above explained problems nowadays all companies in the electronic , automotive, pharmacy and other industrial field are spending lot of time to bulid up a proper ESD contol system. Beyond of the technical support our company is providing complete productline and system for this aspiration.
All of our services and products are complete the recommendations of the international ESD standards (ANSI/ESD 20.20:2007 and IEC 61340-5-1/5-2:2007) and fonfirm the regulation of EC certification.
Vermason is a manufacturer of ESD protection products and was founded in Letchworth in 1979. In April 2007 Desco Industries, Inc. of Chino California acquired 100% of the shares of Vermason Ltd. Vermason is now a division of Desco Industries, Inc.
Vermason prides itself in its practical knowledge of ESD and its ability to develop new products.
From the early 80's when ESD protection was a state of the art knowledge, Eurostat started to engineer product fighting against ESD hazards. 25 years later Eurostat group has become the European leader in manufacturing and distributing ESD products. With headquarter in France, occupying more than 5000 sqm, Eurostat has branches in the Netherlands, Sweden and UK and a wide distributor network across Europe.
Charleswater Limited is a limited-liability company, registered in England. It is a wholly owned subsidiary of Desco Industries Inc. (DII), an American corporation based in California. Charleswater and DII have over twenty-five years of experience and expertise in the theory and practice of controlling electrostatic energy in the production electronics context. The organisation is happy to pass this knowledge on to it's distributors and customers.
Your ESD control plan should require that your products receive continuous ESD protection from component suppliers through all manufacturing steps including inspection, test, storage, shipment, installation, use, maintenance, replacement and repair functions. Rely on Protektive Pak’s wide range of material handling and packaging products to protect your products from ElectroStatic Discharge (ESD), and from physical and shock damage.
Regarding ESD control, significant savings can be achieved by reducing catastrophic failures, but the greatest savings come from reducing latent defects which cannot be detected by normal factory inspections. Using Protektive Pak products correctly can assist you in improving your quality, productivity, and customer satisfaction.
Bimos the leading manufacturer of workplace seating in Europe.
For decades, we have focused on providing specialised seating solutions for work away from the conventional desk. As an Interstuhl brand (the office chair specialist), we are backed up by 40 years of development and production experience. And we are able to combine the latest research and technology with traditional craftsmanship.
Despite the huge diversity of products on offer, all our seating solutions have a common objective: To provide people with optimum support. Our chairs certainly do that, but they also leave you free to move. They are flexible, yet resilient. They fit perfectly into the working environment without requiring users to adapt. That is the ideal for which we stand.
The name’s bimos.
Bimos ESD chairs meet the requirements of standard EN 61340-5-1 as far as their use in EPAs (ESD Protected Areas) is concerned. Thanks to the optimum choice of materials and connection technology used, bimos chairs reliably prevent the build-up of electrostatic charges. In addition, the chairs are designed to direct any charges that the user may be carrying safely down to the conductive base as soon as he or she sits down. Thus, bimos ESD chairs offer a fully integrated system of protection.
WEZ de 50 ani unul dintre cei mai importanti producatori de piese și produse de turnat prin injecție din sectorul logistic . Experiență excelentă în domeniul de turnare prin injecție plastic . Utilaje moderne și expertiza pentru a oferi soluții la nevoile individuale sau atingerea bine . În plus față de serviciile de producție , cost-eficiente pentru a produce personalizat mércéta împotriva concurenților , printre care găsim ca individul a , piese fabricate Ntot , precum și excelent LOGILINE ® și BLACK LINE ® ( ESD ) produse.
cel mai mare producator mondial de componente și sisteme de control statice . Din 1936 furnizarea de soluții la problemele electrostatice în multe industrii . Simco - Ion < / strong > familie de produse ce oferă un control complet static are , ca rezultat al multor ani de cercetare , ingineri afară , andthe experiență site-ul bazat . Sunetul numelui poate fi sigur de performanță maximă , fiabilitate , andthe viață lungă . Și ionizatoare desktop generale , sisteme de " pistol cu aer " , duze , și alte sisteme de măsurare și senzori finaliza produsul kkínálatot . < / p >
StaTech Systems Ltd. (STS) has been working almost 20 years for "ESD protection" in general and for "electrostatic," in particular. Two departments deal with different tasks. During the one is dealing with the trading of ESD protection products, is the accredited area "StaTech System AG, Engineereing + Consultancy" offering knowledge and experience to third parties, as ESD auditors, inspectors, consultants and training coaches. Technically competent staff with years of experience is able to provide excellent technical support to the customers.
Treston 40 ani a fost proiectarea si construirea de diverse mese de lucru , rezervoare de stocare și alte piese de mobilier industrial . Printre unul dintre cei mai importanti producatori din Europa , care sunt special concepute pentru a fi utilizate în mobilier industrial și sisteme de stocare . Filialele Treston acum in Germania , Marea Britanie , Suedia , Norvegia , Polonia , Țările de Jos și care recent , de asemenea, găsite . Aproximativ 65 % din producție este exportată . Monitoarele Treston și înregistrează fiecare etapă a procesului de comandă , astfel încât atunci când ajunge la site-ul clientului , asigurați-vă că serverul corect pe , . greșeală < / p >
DIPA mai mult de 20 de ani de experiență semnificativă în electronică andthe industria de semiconductori . Ca urmare a nevoilor și cerințelor clienților , DEAP a început propria producție în VIKING marca . De bază viking situat în Sankt Petersburg . Posted / > DIPA style="line-height:1.6em"> < / p >
Today ABEBA is one of the biggest and most modern shoe companies in Europe. Since 01st July 2007 we are belonging to the Polish company PROTEKTOR. The PROTEKTOR group is a public limited company and noted in Warsaw.
With our stock in St. Ingbert, our French subsidiary ABEBA France sarl. and our productions in Moldova and now also in Poland, we are able to meet your requests. We see it as our obligation to produce and sell modern safety and occupational shoes according to the European standard for our customers meanwhile in more than thirty countries. ABEBA Comfort Shoes are exclusivelyavailable at specialised technical outlets or specialist stores for occupational shoes - worldwide more than 2000 specialised shops with trained personnel. You can feel confident and safe with us!
Established in 2000, Calzados Robusta, S.L., have excelled in the manufacture of Safety and Occupational Footwear.
Based in La Rioja-Northern Spain and constantly evolving, Robusta has become a national and international benchmark with over 300 references in their catalogue, specializing in Industry, Food, Forestry, Security Sector, Healthcare and Catering among others.
This evolution is due to the unique union between our customers and the philosophy of Robusta, which is based on a caring, permanent customer service, a strict production and quality operation, providing bespoke tailored solutions to meet the requirements every customer needs. This important customer feedback enables us to develop future footwear solutions due to all the information collated.
For more than 35 years schürr has stood for high-quality footwear. Their in-house production gives them flexibility and offers a quick response to all customers‘ needs. The feedback from the clients confirms this philosophy. Are you looking for a specific solution? Just check the catalog. Thanks to decades of technical expertise the company has been able to create a range of outstanding professional and safety shoes made of high quality materials and guaranteeing a perfect fit.
Sievi is located in central Ostrobothnia, in the southern part of the province of Oulu, Finland Sievin Jalkine Oy, known as SIEVI around Europe, was founded in 1951 and with over 50 years experience has grown to be the leading manufacturer of Safety- and Occupational Footwear in Northern Europe.
Sievi Group consists of a manufacturing company Sievin Jalkine Oy, a marketing company Sievi Marketing Oy, a tool and mould making company Sievi Tools Oy, a leather factory Lapuan Nahka Oy, all four in Finland, and of daughter companies in Sweden, Norway and Germany, as well as a marketing organization Sievi UK in Great Britain, Sievi DK in Denmark, Sievi BENELUX in Belgium, and Sievi Baltic and Russia in Estonia. The business idea of Sievi is simple and clear: specializing in Safety- and Occupational Footwear.
Managers responsible for ESD control programs at leading companies use continuous monitors, ionization, and test equipment with computer data acquisition capabilities. Knowledge of ongoing proper grounding, ionization offset voltages, and test results lead to improvement in product yields and reliability. Deal with the manufacturer who backs up EMIT products with superior warranties. Desco Industries, Inc. has been in business for over thirty years and has the financial strength for its warranties to be meaningful.
Most products have 5 year limited warranties. EMIT stands behind its products.
LICEFA as a specialist in field of plastic packaging is one of the leading manufacturers of innovative and high quality packaging solutions. In their over one hundred year history they have made a renowned name in the industry of plastic packaging
Standard and custom vertical
With its standard range of sizes and a custom vertical integration, such as special colours, screen printing and inserts made of foam or thermoformed plastics making them an ideal partner for packaging.
For dental, promotion optics, acoustics, electronics and medicine
With its wide range of round boxes, square boxes, assortment boxes, suitcases, building cabinets, conductive packaging, SMD-boxing and dental cabinets, provides practical and safe packaging solutions for dental, promotion, optics, acoustics, electronics and medicine.
STRÖBEL is a medium sized family business since 1978.
At the beginning the focus was on the trade of packaging aids and special papers. Due to new investments in machinery, today’s focus is on manufacturing their own range of products.
These are predominantly in the fields of environmentally protective packaging and long-term preservation but also in the electronics sector. The products are manufactured in-house are not produced off the rack. They are tailor made to YOUR requirements. Every manufactured and trade product is stored in Ströbel's own warehouse. This guarantees a delivery on time.
HANS KOLB's success goes back to the year 1933 when the first cardboard factory was established by Hans Kolb. Since that time, the KOLB Group developed into an internationally trading enterprise. They develop and produce packaging, packaging materials and specialised products made in corrugated cardboard. In all their activities, they aim at responding quickly and flexibly to the changing demands of the market.